TAC module, pedal, computer compatibility
05-03-2010, 02:37 PM
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Oct 2008
Location: Russellville, Arkansas
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
TAC module, pedal, computer compatibility Can anyone confirm or deny following statements.
1. On a DBW setup, any wiring harness with a blue green should work as long as the TAC module and pedal come from the same vehicle.
2. Any computer can run drive by wire.
1. On a DBW setup, any wiring harness with a blue green should work as long as the TAC module and pedal come from the same vehicle.
2. Any computer can run drive by wire.
05-03-2010, 05:18 PM
#2
05-04-2010, 11:06 AM
#3
Launching!
Thread Starter
iTrader: (1)
Join Date: Oct 2008
Location: Russellville, Arkansas
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Still trying to figure this out. Will any blue/green PCM work for DBW as long as the pedal and TAC are from the same vehicle, or does the pedal and TAC have to be from the same vehicle as the PCM?
05-04-2010, 11:18 AM
#4
call john at speartech he can help you out.. i have a red/blue ecu which is a ls1 which came in many different vehicles. and i have a new tac module i bought from speartech that built me my harness and my motor is a 06 ls2 with a corvette pedal.
