Just got 618 Hawk balancer tool
#1
Just got 618 Hawk balancer tool
Just got my tool today I only ordered it 3 days ago, I have been dreading the instal of my balancer, I borrowed one from auto zone for my Gen 1 small block 3 years ago it was a disaster. This tool is $45 shipped I literally put my balancer on in 2 minutes. This is the best tool ever if you don't want to strip your crank threads
#3
TECH Fanatic
iTrader: (361)
Thank you for the kind words and great pics. It has pleasure to be able to help you out. Have had a few changes with the listing of the tool. It is now being carried and sold by. BYUNSPEED.
http://www.byunspeed.com/product_inf...ducts_id=10976
https://ls1tech.com/forums/tools-fab...l#post14358912
https://ls1tech.com/forums/sponsor-g...-purchase.html
http://www.byunspeed.com/product_inf...ducts_id=10976
https://ls1tech.com/forums/tools-fab...l#post14358912
https://ls1tech.com/forums/sponsor-g...-purchase.html
Last edited by 618HAWK; 01-14-2011 at 04:07 AM.
#6
TECH Fanatic
iTrader: (361)
Here are a few dimensions if it helps.
Overall length of the tool is 9.5"
Pusher section is 4.5"
Hope this helps.
Chris
#7
TECH Resident
iTrader: (28)
I have about 8in from the front of the crank snout to the radiator...Maybe I'll be able to use it without pulling the core support off or loosening it up....The main issue would be getting it threaded in the crank... after that I should have plenty of room cause that'll eat up about 4 in of the threaded rod....