1976 Vega Wagon
09-16-2011, 10:46 AM
#21
TECH Apprentice
S-10/Vega frame swap Hey, I tried this same swap on my hatchback. shortened the frame to 97.25 and ended up with the frame kick-ups hitting the door openings. Completely eliminated the back seat & sat like a 4x4. Long story short, it now has a 2x3 tube frame under it. Will be doing a 4.8 or 5.3 swap, so keep the pic's coming.
Are you posting this over on V8monza.com?
Jim
Are you posting this over on V8monza.com?
Jim
09-21-2011, 06:30 PM
#22
On The Tree
Thread Starter
Join Date: Nov 2010
Location: South East, MO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I tried this same swap on my hatchback. shortened the frame to 97.25 and ended up with the frame kick-ups hitting the door openings. Completely eliminated the back seat & sat like a 4x4. Long story short, it now has a 2x3 tube frame under it. Will be doing a 4.8 or 5.3 swap, so keep the pic's coming.
Are you posting this over on V8monza.com?
Jim
Are you posting this over on V8monza.com?
Jim
09-21-2011, 06:42 PM
#23
On The Tree
Thread Starter
Join Date: Nov 2010
Location: South East, MO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
I have a few updates for you all. Not much but I did get some 2" drop spindles on and got the brakes hooked up and working. I also started working on the headers and did not like the way it was working out. I made the choice to go with a turbo setup instead. Started making the truck manifolds where they will work. Now I am trying to get the radiator support and alternator bracket made. Here are a few pictures of progress so far.
10-20-2011, 05:16 PM
#25
Teching In
Join Date: Dec 2010
Location: Cincinnati, ohio
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
vega wagon I just ran across this thread. had to say, like the wagon. I'm building a 72 GT vega Hatch back. 5.3 aluminum LS with a 5 spd. I like the full frame idea. especially since your body had cancer. Mine is too nice to cut up, so i'm going what will ultimatley be the hard way. Stuffing all this into a Vega surround and then adding support and frame ties etc....
Very nice work, cant wait to see more.
DD
Very nice work, cant wait to see more.
DD
11-15-2011, 02:31 PM
#28
On The Tree
Thread Starter
Join Date: Nov 2010
Location: South East, MO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
I just ran across this thread. had to say, like the wagon. I'm building a 72 GT vega Hatch back. 5.3 aluminum LS with a 5 spd. I like the full frame idea. especially since your body had cancer. Mine is too nice to cut up, so i'm going what will ultimatley be the hard way. Stuffing all this into a Vega surround and then adding support and frame ties etc....
Very nice work, cant wait to see more.
DD
Very nice work, cant wait to see more.
DD
12-20-2011, 08:33 AM
#29
Registered User
Join Date: Dec 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I was lucky enough to get to help him one day on this car , it was a blast I have done auto body since high school but have never done much fab work and he was nice enough to let me help and learn a little . He has got me ready to start a ls project of my own a 72 Austin America
03-13-2013, 01:29 PM
#30
On The Tree
Thread Starter
Join Date: Nov 2010
Location: South East, MO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Hey there everyone I am back with a little update. Things are still going really slow on this project. I don't have the extra money to throw at it but I am trying to chip away a little at a time.
I have made motor mounts and installed a manual steering rack from an '80 Fairmont. I also bought a Vic. Jr. intake and a pair of 57mm. turbos and have them mocked up. I traded the truck pan for an f-body pan and have redone the mounts for the rack and moved it up a little above the cross member. Here are a few pics.
I have made motor mounts and installed a manual steering rack from an '80 Fairmont. I also bought a Vic. Jr. intake and a pair of 57mm. turbos and have them mocked up. I traded the truck pan for an f-body pan and have redone the mounts for the rack and moved it up a little above the cross member. Here are a few pics.
12-18-2013, 02:49 PM
#37
On The Tree
Thread Starter
Join Date: Nov 2010
Location: South East, MO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Wow it has been a long time. I have finally gotten some money together and started ordering parts. I have pulled the steering rack and narrowed it 4". I have also cut the front frame rails off and am building 2x3 rectangle tube front rails to make more room for a radiator.
I have purchased the Holley hp EFI computer and wiring harness. I also have the Holley twin billet fuel pump and matching filters. I got a pair of precision 39mm wastegates and a tt intercooler with tubing on the way. Also got all the exhaust stuff coming.
I am going to order a power glide trans. from PTC along with one of their 10" converters as soon as I figure out a cam for the 5.3. I will get some new pictures up when i get some of the stuff done.
I need build an elbow the fit the edelbrock intake.
I hope to have it running and driving by spring time.
I have purchased the Holley hp EFI computer and wiring harness. I also have the Holley twin billet fuel pump and matching filters. I got a pair of precision 39mm wastegates and a tt intercooler with tubing on the way. Also got all the exhaust stuff coming.
I am going to order a power glide trans. from PTC along with one of their 10" converters as soon as I figure out a cam for the 5.3. I will get some new pictures up when i get some of the stuff done.
I need build an elbow the fit the edelbrock intake.
I hope to have it running and driving by spring time.
