Nate_67RS

http://cgi.ebay.com/ebaymotors/ls1-4...#ht_882wt_1165

is this too good to be true?

Pop N Wood

iTrader: (1)

The guy is selling a 50K mile LS1 motor out of a 2000 camaro and a trans out of an older pickup truck for $4200.

Nothing special about that deal IMO, unless of course if you are the seller.

Nate_67RS

plus everything for the swap if you read lower

Pop N Wood

iTrader: (1)

I did and it wasn't clear what that included. He has a pickup truck trans on an F body motor, no way that could be a generic kit. Better check the details before you bid.

FWIW complete F body pull outs can easily be had for less than $3k. That isn't even one of the more desirable years.

TomM

iTrader: (57)

Umm, I'm confused, he states a Camaro motor with a truck tranny, shows you a six speed ball, and two different cars........personally I'd pass......a pullout is usually the entire pullout, mated to the matching tranny, with a wiring harnes etc.....does it come with those headers?

I wasn't aware they made a 4L80E in 1996, somebody correct me here........

Better deals to be had for the money....but that's just my opinion, take it for what it's worth...

T,

SpecV44

iTrader: (7)

They did, I am running a 30 spline NP241C transfer case (4L80E) from a 1995 K3500 dually, in my 2003 Silverado 6.0L/4L80E. TH350/700r4/4L60E transfer cases are 27 spline, TH400/4L80E are 30 spline.

Carman72

I know they make transmission stand alone kits that do a 4l60 or 4l80 they run 6-800 and will do either trans. The article doesn't say if the turbo or headers are included so I would defintily talk to them because without a special conversion I dont think you can use that computer with the 4l80 trans. I looked into doing that and found it easier to do a 4l60(well so I think)

bczee

iTrader: (12)

being ebay.. i would get a list of everything that is included so you know what your getting. No big suprises.. !