Any members doing LS Harness modifying?
#1
Launching!
Thread Starter
iTrader: (10)
Join Date: Aug 2006
Location: Washington
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Any members doing LS Harness modifying?
Dont know if this is the right forum for this or not so i appologize mods if you have to move.
Wondering if there is any members on here that are doing LS swap harness mods, Im wanting the un-needed wiring taken out of my harness(emissions stuff, trans stuff, and there is a O2 sensor connector i believe it is that was cutoff from whoever pulled the harness(i bought harness already pulled).
We are putting a 5.3l in my little brothers 79 chevy k10 and depinned the harness ourself and removed the wires but ended up with just a big tangled up rats nest of wiring from moving the harness around tracing wires through and such. Ended up being a nightmare and it was so tangled we depinned every pin from the pcm connectors and seperated each wire out to its individaul connector and had to lay it on his engine and put the harness back together from there.
It is a 99-02 truck harness(red/blue connectors).
Wondering if there is any members on here that are doing LS swap harness mods, Im wanting the un-needed wiring taken out of my harness(emissions stuff, trans stuff, and there is a O2 sensor connector i believe it is that was cutoff from whoever pulled the harness(i bought harness already pulled).
We are putting a 5.3l in my little brothers 79 chevy k10 and depinned the harness ourself and removed the wires but ended up with just a big tangled up rats nest of wiring from moving the harness around tracing wires through and such. Ended up being a nightmare and it was so tangled we depinned every pin from the pcm connectors and seperated each wire out to its individaul connector and had to lay it on his engine and put the harness back together from there.
It is a 99-02 truck harness(red/blue connectors).
#5
LS1Tech Sponsor
iTrader: (5)
If you dont find someone to rework we have them new for $499, free shipping to LS1TECH.COM members. Brand new with extended length to mount the PCM under the dash.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#6
Staging Lane
iTrader: (12)
Join Date: Jan 2010
Location: Grayslake, IL
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I used this guy I found on ebay. I was a little hesitant, but you can't beat his price. He did some very nice work. It looked nice and it works perfectly. Cost me $249 + the cost of shipping it to him. I opted to not have the DLC port added in, this is another $15 or so. Turn around time is around 3 weeks. I put a link to his listing below.
Removed nonsponsor link
Removed nonsponsor link
Last edited by G-Body; 07-19-2011 at 10:37 PM. Reason: Removed non-sponsor link