6.0l wiring harness question..
02-11-2012, 01:16 AM
#1
Staging Lane
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: mo
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
6.0l wiring harness question.. Started on my wire harness tonight and have a few wires left from the C2 underhood fusebox plug that I'm having a hard time figuring out what they need to go to. All five go to the neutral safety switch but not sure what i need to hook them up to. It is a 2001 6.0l harness. Thanks for any input!
C2 plug - Wire color - Description
F11 - yellow - Transmission mounted neutral safety switch output
F9 - pink - fused ignition positive voltage
E3 - light green - Transmission mounted neutral safety switch output-park
A9 - light green - back-up lamp feed(pretty sure i know where this one will go)
F10 - purple/white - starter relay feed- coil
Also on this same plug their is a pink wire that goes from pin F2 to the C100 pin C. What do i need to do with this wire?
C2 plug - Wire color - Description
F11 - yellow - Transmission mounted neutral safety switch output
F9 - pink - fused ignition positive voltage
E3 - light green - Transmission mounted neutral safety switch output-park
A9 - light green - back-up lamp feed(pretty sure i know where this one will go)
F10 - purple/white - starter relay feed- coil
Also on this same plug their is a pink wire that goes from pin F2 to the C100 pin C. What do i need to do with this wire?
02-11-2012, 08:52 AM
#2
TECH Regular
Join Date: Oct 2009
Location: Whitehall,PA
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Have you checked www.lt1swap.com? Lots of good info there I have used that site almost as much as this site!
