Old Geezer

iTrader: (3)

NE1 found a way to rewire a truck TAC and foot pedal to work with the Vette throttle body??
I am looking to use an 05 truck pedal/TAC with an 03 Vette t/b. [The Vette TAC modules have been discontinued by GM.]

Any help is appreciated!

99VetteFRC

I can get you some schematics to compare with. I don't know if use the same resistances in the pedals. You should check the values before considering this.

Old Geezer

iTrader: (3)

Thanks! We have the schematics, and are looking at the values....We have done scans on the resistors and looked at their hi/lo wiring positions. Nothing concluded as to what we may/may not change to get this to work....
We are now looking at the other input[s] to the pcm, that may be needed for it to work..


More later.........

99VetteFRC

You could always use a truck TB right?

70lsgto

iTrader: (2)

Im using an 04 truck pedal to control a 05 vette ls2 using a tac box from speartech, but the guy that set it up on the dyno had to do some programming to make it work, hope this helps.

Old Geezer

iTrader: (3)

We've scanned all the resistances and have made a chart of such.
The LS2 t/b is next on the schedule..Seems some Vette guys are making that swap.