Lets say I wanted AC
#1
Lets say I wanted AC
I have the compressor, I can make it fit. The condenser dryer ect is a different story.
but its a mid engined car, and it never had provision for AC.
what is the simplest cheapest lightest and smallest way to get AC in a car that never had it, and has no heat?
I don't really want to add the weight, the cost or the complexity. but damn, these recent hundred degree days have been killing me.
and is there by chance a removable AC option?
but its a mid engined car, and it never had provision for AC.
what is the simplest cheapest lightest and smallest way to get AC in a car that never had it, and has no heat?
I don't really want to add the weight, the cost or the complexity. but damn, these recent hundred degree days have been killing me.
and is there by chance a removable AC option?
#2
I'll be anxiously awaiting the answer to this one. I've been thinking along the same lines. No sense in letting that perfectly good compressor go to waste. There's gotta be a simple, not too expensive, stand-alone, solution.
#5
Launching!
iTrader: (1)
Join Date: Apr 2012
Location: NC
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I am sure if you hunt around you can find a real good price and Amazon is pretty great. I buy a lot of parts from them. You should be able to get lines made from a local place and will just have to get a dryer fitted
Trending Topics
#9
#10
In New York where electric rates are disgusting during the day, a lot of older buildings that are less efficient have found that the easiest and cheapest way to use AC is to freeze a chemical compound overnight, then run water around and through it and into "radiators" and then blow a fan past the radiators for AC.
I bet you could make a similar set up for a car, but it wouldnt be good for much but real short trips.
I will check out some of the other companies. my problem is the engine is in back and the radiator is in front, so Id have to run some very long AC lines.
I bet you could make a similar set up for a car, but it wouldnt be good for much but real short trips.
I will check out some of the other companies. my problem is the engine is in back and the radiator is in front, so Id have to run some very long AC lines.
#11
In New York where electric rates are disgusting during the day, a lot of older buildings that are less efficient have found that the easiest and cheapest way to use AC is to freeze a chemical compound overnight, then run water around and through it and into "radiators" and then blow a fan past the radiators for AC.
I bet you could make a similar set up for a car, but it wouldnt be good for much but real short trips.
I will check out some of the other companies. my problem is the engine is in back and the radiator is in front, so Id have to run some very long AC lines.
I bet you could make a similar set up for a car, but it wouldnt be good for much but real short trips.
I will check out some of the other companies. my problem is the engine is in back and the radiator is in front, so Id have to run some very long AC lines.
http://www.ebay.com/itm/1950-60s-vin...sories&vxp=mtr
#14
A/c
The length of your linesbecome"it is what it is", rear engine porches have A/C don't they?
Either of those mini evaperators will work, just need a condenser and a dryer, the fittings are relatively cheap, the hose about 3.50 a foot, how much your local shop charges is the question, I install and this is what it costs me. For the inside lines that you can asemble, use the EZ clip that Vintage air has, they are a lot more flexible than the beadlock type line, as far as that goes, you can use them anywhere, that leaves out the shop that crimps your lines, however the EZ clip fittings are a bit more... Good Luck.....I use this cause it pisses Obozo off
Either of those mini evaperators will work, just need a condenser and a dryer, the fittings are relatively cheap, the hose about 3.50 a foot, how much your local shop charges is the question, I install and this is what it costs me. For the inside lines that you can asemble, use the EZ clip that Vintage air has, they are a lot more flexible than the beadlock type line, as far as that goes, you can use them anywhere, that leaves out the shop that crimps your lines, however the EZ clip fittings are a bit more... Good Luck.....I use this cause it pisses Obozo off
#16
I think at the moment I am going to remove the alternator and install the AC compressor and then just let it hang there. I do not have the cash to do the AC right now.
The AC compressor has to go on first, and once the body is mounted removing the alternator will require either pulling the body or pulling the motor and transmission (ya, its that harsh, working on options)
The compressor bolts onto the side, and I think the lines come out the side as well, leaving it open to be easily worked on later. if in the end I decide to scrub the AC I can just cut the AC belt and pull the compressor off.
I want to make the rear panel of the front of the body removable to avoid such issues, but that removes a LOT of the rigidity of the body, I hope to put a roll bar back there and securely mount the roll bar to the body and have the roll bar bolt to the frame. then the bar will make up for the suport and I can still unbolt the bar to remove the body.....
The AC compressor has to go on first, and once the body is mounted removing the alternator will require either pulling the body or pulling the motor and transmission (ya, its that harsh, working on options)
The compressor bolts onto the side, and I think the lines come out the side as well, leaving it open to be easily worked on later. if in the end I decide to scrub the AC I can just cut the AC belt and pull the compressor off.
I want to make the rear panel of the front of the body removable to avoid such issues, but that removes a LOT of the rigidity of the body, I hope to put a roll bar back there and securely mount the roll bar to the body and have the roll bar bolt to the frame. then the bar will make up for the suport and I can still unbolt the bar to remove the body.....
#17
TECH Senior Member
iTrader: (12)
You can get them roof mounted ones at Wal-Mart pretty cheap..! .. hmm or was that a K-Mart Blue Light Special...
LOL..
But yeah.. check out those Classic or Vintage Universal kits.. they have a few unit that are pretty small.. and if it is a mid-engine Car.. I would assume that the interior is pretty small and would not need a very large capacity one at all.
BC
LOL..
But yeah.. check out those Classic or Vintage Universal kits.. they have a few unit that are pretty small.. and if it is a mid-engine Car.. I would assume that the interior is pretty small and would not need a very large capacity one at all.
BC
#18
These guys also have a lot of universal parts and good info of their site. I used parts from here to build the A/C system in my 1977 Volvo.
http://www.nostalgicairparts.com/
http://www.nostalgicairparts.com/