Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

? for first gen swap

Thread Tools
 
Search this Thread
 
Old 09-16-2014, 06:18 PM
  #1  
Teching In
Thread Starter
 
66duce's Avatar
 
Join Date: Nov 2013
Location: Clinton Tennessee
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default ? for first gen swap

My harness instruction says the red wire to hot cranking and run. Wondering where you connected it.
Old 09-16-2014, 06:45 PM
  #2  
TECH Senior Member
iTrader: (12)
 
bczee's Avatar
 
Join Date: Jan 2006
Location: Concord, CA
Posts: 6,665
Likes: 0
Received 5 Likes on 5 Posts

Default

That would ne to a ign hot circuit when the key is battery hot with the key is in run and start. If it dosen't stay hot when moving from Run to Start and back to Run... you will have problems.

Normally on GM cars/trucks.. this would be a pink wire circuit. Check this with a DVM.
Old 09-18-2014, 08:33 AM
  #3  
Teching In
Thread Starter
 
66duce's Avatar
 
Join Date: Nov 2013
Location: Clinton Tennessee
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Default

Will do thanks



Quick Reply: ? for first gen swap



All times are GMT -5. The time now is 08:13 AM.