Anyone Use "Affordable Fuel Injection" Engine Harness? UPDATE-I HAVE
#1
Anyone Use "Affordable Fuel Injection" Engine Harness? UPDATE-I HAVE
I thought I had researched pretty much every vendor for a stand alone engine harness then I found these guys yesterday. I like that they used a closed braided wrap and the Bussman box. I spoke with them yesterday and they seem enthusiastic about building a harness with some custom features that I am looking for.
Does anyone have any feedback on these guys?
http://www.affordable-fuel-injection.com/about.html
Does anyone have any feedback on these guys?
http://www.affordable-fuel-injection.com/about.html
Last edited by alocker; 07-28-2015 at 05:40 PM.
#3
I am updating this because I just received a custom harness from Affordable Fuel Injection. Overall I am very impressed with the service and product. My harness was built with a few features not available in an off the shelf product. Here are some of my harness needs.
-MAP reference for the fuel pump controller to provide fuel pressure rise with boost. MAP wires integrated in the harness to pass into interior.
-6 ft main harness extension to mount ECM, TCM, and fuse box on the front passenger fender.
-Custom length and position O2 sensor pigtails.
-Specific main feed, OBD, DBW, and fuel pump signal branches.
I initially called and spoke with Andy to find out what they were capable of. He was happy to answer all my questions and seemed confident that all my needs would be met. When I was ready I put together a diagram of the harness branches and lengths and email it to Andy at AFI.
The harness looks great and has everything I requested. While I have not installed and run it, communication has been very good and I have no worries if I need support.
Small labels on each connector is a nice touch and don't need to be removed.
High temp sleeve by the starter.
-MAP reference for the fuel pump controller to provide fuel pressure rise with boost. MAP wires integrated in the harness to pass into interior.
-6 ft main harness extension to mount ECM, TCM, and fuse box on the front passenger fender.
-Custom length and position O2 sensor pigtails.
-Specific main feed, OBD, DBW, and fuel pump signal branches.
I initially called and spoke with Andy to find out what they were capable of. He was happy to answer all my questions and seemed confident that all my needs would be met. When I was ready I put together a diagram of the harness branches and lengths and email it to Andy at AFI.
The harness looks great and has everything I requested. While I have not installed and run it, communication has been very good and I have no worries if I need support.
Small labels on each connector is a nice touch and don't need to be removed.
High temp sleeve by the starter.
#4
TECH Fanatic
iTrader: (9)
Join Date: Mar 2004
Location: CANADA!
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
2 friends have used him before. 1 we had no issues, the other one the o2 sensors were wired incorrectly. Not a big deal but for someone that isn't good with wiring, it could be an issue. From ordering to receiving it was quick!
#5
Never used their product but they have been around a long time. Back around 2000 I sold their buddy a 64 C10 2wd short fleet big window. I had put in a 350 with a crossfire and was running a newer Silverado fuel management on it. They found it for their friend and he bought it on their reccomendation. Saw it a few years later and it had a ram jet. Ahhhh, memories.
Trending Topics
#12
We do customer reworked harness' for $349 which includes:
- Weatherproof fuse/relay box
- Upgraded power and ground wires (high quality TXL)
- Addition/subtraction of anything you would need for your project (fans, A/C, ect)
We offer Brand New custom harness' starting at $499 which are 100% custom to fit your project and have different coverings from Loom to Nylon Mesh. Everything is made-to-order and is pinned out 3 times and run on an actual engine stand/dyno as well. Every new harness comes with lifetime warranty and have all weatherproof relay/fuse boxes.
Your more than welcome to give me a call with any questions.
Andy (989) 413-0717
- Weatherproof fuse/relay box
- Upgraded power and ground wires (high quality TXL)
- Addition/subtraction of anything you would need for your project (fans, A/C, ect)
We offer Brand New custom harness' starting at $499 which are 100% custom to fit your project and have different coverings from Loom to Nylon Mesh. Everything is made-to-order and is pinned out 3 times and run on an actual engine stand/dyno as well. Every new harness comes with lifetime warranty and have all weatherproof relay/fuse boxes.
Your more than welcome to give me a call with any questions.
Andy (989) 413-0717
#15
We do customer reworked harness' for $349 which includes:
- Weatherproof fuse/relay box
- Upgraded power and ground wires (high quality TXL)
- Addition/subtraction of anything you would need for your project (fans, A/C, ect)
We offer Brand New custom harness' starting at $499 which are 100% custom to fit your project and have different coverings from Loom to Nylon Mesh. Everything is made-to-order and is pinned out 3 times and run on an actual engine stand/dyno as well. Every new harness comes with lifetime warranty and have all weatherproof relay/fuse boxes.
Your more than welcome to give me a call with any questions.
Andy (989) 413-0717
- Weatherproof fuse/relay box
- Upgraded power and ground wires (high quality TXL)
- Addition/subtraction of anything you would need for your project (fans, A/C, ect)
We offer Brand New custom harness' starting at $499 which are 100% custom to fit your project and have different coverings from Loom to Nylon Mesh. Everything is made-to-order and is pinned out 3 times and run on an actual engine stand/dyno as well. Every new harness comes with lifetime warranty and have all weatherproof relay/fuse boxes.
Your more than welcome to give me a call with any questions.
Andy (989) 413-0717
#17
That's awesome. I loved that truck and saw it quite a few years ago at Midland, he had put Cragers on it and it looked great. Thanks for the update and tell Jim that Lance says hi.