GM LS6 and M6 Build up on T/A
#1
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
LS6 motor and A4 to M6 Swap DONE!!!!!
My friend levi is doing the project and im helping him out, also helping James and sean. The car is a '99 T/A 60k mileage oil burning ls1 with a A4......We are Pulling out the old LS1 and auto, and then throwing in a GM crate long block LS6 and Six Speed Inc Stage 4 6-Speed, new coated jet hot, LS7 Clutch, LS6 Intake, ARP everything, and plenty of other goodies., levi dropped off the LS6 intake with Sean for paint. Turned out f'n sick lookin, Sean does good work Here's some pics. Sorry for the blurriness on some of them.
ls6 intake panted to match car
LS6
Fresh M6
Car getting read to be stripped
Day 2 got everything out
sorry we had a finger print on the linse
out will the old in withthe new. We will be working on it again this friday
ls6 intake panted to match car
LS6
Fresh M6
Car getting read to be stripped
Day 2 got everything out
sorry we had a finger print on the linse
out will the old in withthe new. We will be working on it again this friday
Last edited by SIC LSX; 02-23-2008 at 03:29 AM.
#2
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
update
day 3 Pics from tonight. Levi got all the M6 foot pedals and master cylinder put in and the A4 stuff out tonight. I got the Wire mod and good latch mod done We also got the polly motors mounts swapped over. Ill let levi add anythinge else Sean also swing buy to help out
where to cut plastic for master
After cut
Levi working on pedals
after pedals are in
Wire mod b4 amp wire relocation
air pump and hood latch cable gone
More sweet intake pics
[/quote]
where to cut plastic for master
After cut
Levi working on pedals
after pedals are in
Wire mod b4 amp wire relocation
air pump and hood latch cable gone
More sweet intake pics
[/quote]
Last edited by SIC LSX; 01-28-2008 at 08:02 AM.
Trending Topics
#10
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
We got a few things done today. Ac on, alternator on, power steering on, cut hole for shifter, put clutch and bell housing on and headers on and few other little things.
stencil for where to cut for M6 shifter
Plasma baby
See
LS7 clutch
LOL get it james
Pacesetter Headers
Ac/alternator/power steering on the car. We got held up because of the Ls6 pulley and we didnt have the right puller so we didnt put the water pump on due to being easier to get to pulley.
stencil for where to cut for M6 shifter
Plasma baby
See
LS7 clutch
LOL get it james
Pacesetter Headers
Ac/alternator/power steering on the car. We got held up because of the Ls6 pulley and we didnt have the right puller so we didnt put the water pump on due to being easier to get to pulley.
#13
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
its not that bad. My car is red and i had mine ls6 intake painted just like a car with PPG paint for 100$ This guy charges $50 but he uses spray can but you see the turnout.
Look at this FAST intake SOM both were painted like a car
[/img]
LS6 intake SOM
Look at this FAST intake SOM both were painted like a car
[/img]
LS6 intake SOM
#14
TECH Regular
iTrader: (24)
Join Date: Sep 2005
Location: California
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
WOW guys' you work fast and do GREAT work !
I just got done completly tearing apart my friends' 1999 SS took me about 3 weeks doing it myself taking my time. I feel your pain. Keep up the good work !
I just got done completly tearing apart my friends' 1999 SS took me about 3 weeks doing it myself taking my time. I feel your pain. Keep up the good work !
#15
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
We are only working on it a few days and only a few hours those day. It would be done but we needed a few more parts so had to order some new ones so were waiting in them.
#17
Woah-that is my car. Didn't know you frequented LS1tech too Dan, glad to see you on both forums. Everything looks amazing so far can't wait to see it. Only corrections I have are its probably considered "low mileage" (60k), and the headers are jet-hots not pacesetters. The missing parts have all been shipped and should be there early this week like I told Levi, so you guys should be back in business!
#18
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
sweet! Those jet hots look just like pacesetter lol Your going to love that ls7 clutch! I have had mine for around 2 years now and was the 2nd person to do the swap. I have about 20,000 hard miles and a ton of burnouts and still grabbing lie a ****!
#20
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
Well we started the car tonight sounded good and runs great like a stock LS6 Z06 with exhaust! waiting on start up vid
LOL this belt tensioner bracket went from place to this with just hitting with a wire wheels
LOL this belt tensioner bracket went from place to this with just hitting with a wire wheels