For the wiring impaired
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
For the wiring impaired
Has anybody ever used this:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=014
to convert a stock harness to stand alone?
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=014
to convert a stock harness to stand alone?
#2
I purchased this one
http://cgi.ebay.com/ebaymotors/LT1-L...spagenameZWDVW
I've been very pleased with it. The one youve listed looks like it might have more stuff like the OBDII connector.
http://cgi.ebay.com/ebaymotors/LT1-L...spagenameZWDVW
I've been very pleased with it. The one youve listed looks like it might have more stuff like the OBDII connector.
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
I purchased this one
http://cgi.ebay.com/ebaymotors/LT1-L...spagenameZWDVW
I've been very pleased with it. The one youve listed looks like it might have more stuff like the OBDII connector.
http://cgi.ebay.com/ebaymotors/LT1-L...spagenameZWDVW
I've been very pleased with it. The one youve listed looks like it might have more stuff like the OBDII connector.
#4
The instructions are easy and straight forward. Have you seen the retro wiring diagram by Jhankinson in this post.
https://ls1tech.com/forums/showthrea...=312119&page=4
The only difference is the kit I bought only has high and low fan speed. It kicks on one fan at 195 and the second at 205 or 210 something like that. You only need to figure out your year model and pinouts to convert to stand alone using the diagram and the kit. I also ran my a/c stand alone outside of the pcm and the wiring kit.
https://ls1tech.com/forums/showthrea...=312119&page=4
The only difference is the kit I bought only has high and low fan speed. It kicks on one fan at 195 and the second at 205 or 210 something like that. You only need to figure out your year model and pinouts to convert to stand alone using the diagram and the kit. I also ran my a/c stand alone outside of the pcm and the wiring kit.
#5
Has anybody ever used this:
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=014
to convert a stock harness to stand alone?
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=014
to convert a stock harness to stand alone?
4-8 week turn around but that is fine with me.
FB