Budget 5.3/4l60e 240sx Build
08-05-2008, 01:19 AM
#1
On The Tree
Thread Starter
iTrader: (42)
Join Date: Nov 2005
Location: TX
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Budget 5.3/4l60e 240sx Build This car was my daily driver for the past year or so. Leaving to head back to school for summer the KA24e ate a timing chain. I had been wanting to get a GM power plant in it for some time and really could not justify putting money into repairing the 2.4 liter. My goal for the project is to build a reliable daily driver with great potential for further modification, while keeping within a tight budget (less than 3K if possible).
I picked up an 03 5.3 and sold most of the truck external components in order to purchase their F-Body or Vette counterparts. Surprisingly I was able to come out pretty close to even on most of the items. I should be able to get a spread sheet together once I have time to go through my receipts and paypal logs.
Here is a short major parts list for the car and a few pictures.
-03 5.3/4l60e
-F-body Accessories W/PS Delete
-PXracing S14 mounts (slight mods to fit my s13)
-Custom Trans Mount
-Shortened Steel F-body DS
-LS1 Intake, Rail, Injectors
-Bo White TB
-4" Intake Pipe W/Amsoil Filter
-External Holly Pump(free from an old build)
-Vette Regulator/Filter Assembly
-Mishimoto Radiator
-Flexalite 13" Fan(Also from old build)
-98 Vette Manifolds (hacked outlet)
-3" Y to 4" Rear Section(future turbo plans)
--4" AFE Diesel Muffler
-Self modded Harness
--PCMforless Tune
Here is a link to the flickr set of all the photos I have taken so far.
http://flickr.com/photos/27512899@N0...7606450741291/
Ill try and get some pictures of the whole car when it gets closer to completion.
I picked up an 03 5.3 and sold most of the truck external components in order to purchase their F-Body or Vette counterparts. Surprisingly I was able to come out pretty close to even on most of the items. I should be able to get a spread sheet together once I have time to go through my receipts and paypal logs.
Here is a short major parts list for the car and a few pictures.
-03 5.3/4l60e
-F-body Accessories W/PS Delete
-PXracing S14 mounts (slight mods to fit my s13)
-Custom Trans Mount
-Shortened Steel F-body DS
-LS1 Intake, Rail, Injectors
-Bo White TB
-4" Intake Pipe W/Amsoil Filter
-External Holly Pump(free from an old build)
-Vette Regulator/Filter Assembly
-Mishimoto Radiator
-Flexalite 13" Fan(Also from old build)
-98 Vette Manifolds (hacked outlet)
-3" Y to 4" Rear Section(future turbo plans)
--4" AFE Diesel Muffler
-Self modded Harness
--PCMforless Tune
Here is a link to the flickr set of all the photos I have taken so far.
http://flickr.com/photos/27512899@N0...7606450741291/
Ill try and get some pictures of the whole car when it gets closer to completion.
Last edited by NoClassic; 12-15-2008 at 08:00 PM.
08-11-2008, 04:07 AM
#4
On The Tree
Join Date: Jan 2007
Location: Ada, Ok
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
08-24-2008, 01:24 PM
#6
On The Tree
Thread Starter
iTrader: (42)
Join Date: Nov 2005
Location: TX
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Things have fallen behind schedule and I have to return to school tomorrow. Ill be back over the labor day weekend to try and wrap things up.
I finished the manifolds over the weekend. I have less than $100 into both of them.
I finished the manifolds over the weekend. I have less than $100 into both of them.
Trending Topics
08-24-2008, 03:32 PM
#8
On The Tree
Thread Starter
iTrader: (42)
Join Date: Nov 2005
Location: TX
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Spend some time and use the search function.
Check the stickies at the top of this forum. Specifically the FAQ thread.
Check the stickies at the top of this forum. Specifically the FAQ thread.
Last edited by NoClassic; 08-25-2008 at 02:32 AM.
12-13-2008, 08:07 PM
#9
On The Tree
Thread Starter
iTrader: (42)
Join Date: Nov 2005
Location: TX
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the lack of updates. School took over the last couple months and I was not able to get much done on the car.
Just about all of the mechanical is done, save for a few minor details. Now its just wiring and addressing any issues after start up.
I got a few pictures of the current state of the car. Im not too happy with the muffler. Its going to need to be cut down and re welded at some point, but it will do for now.
There are some new pictures in the original flickr link as well.
Just about all of the mechanical is done, save for a few minor details. Now its just wiring and addressing any issues after start up.
I got a few pictures of the current state of the car. Im not too happy with the muffler. Its going to need to be cut down and re welded at some point, but it will do for now.
There are some new pictures in the original flickr link as well.
12-14-2008, 10:43 PM
#11
Teching In
Join Date: May 2007
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
nice! not to thread jack, but i've got a 4.8 lying around, and i was thinking of dropping that in my 91 hatch.
along with some sort of manual transmission. of course i want a t-56, but i might have to settle for a 5 speed of some sort, cause i'm not sure i want to drop the dough on a 6 speed.
congrats on getting more done one this! i'll be looking forward to updates
along with some sort of manual transmission. of course i want a t-56, but i might have to settle for a 5 speed of some sort, cause i'm not sure i want to drop the dough on a 6 speed.
congrats on getting more done one this! i'll be looking forward to updates
Last edited by mondojackal; 12-15-2008 at 09:10 PM.
12-15-2008, 02:05 AM
#13
Teching In
Join Date: May 2007
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
i would say about 100lbs between the iron block 5.3 and the ls1. probably slightly less just motor-wise, but turbo parts are heavy.
*edit*
what kinda car is this going to go in?
*edit*
what kinda car is this going to go in?
Last edited by mondojackal; 12-15-2008 at 02:13 AM.
12-15-2008, 01:11 PM
#14
if your truly worried about the extra weight of the 5.3 get the L33 version available in 05-06 silverado its an all aluminum version with an extra 10hp a little more rare but readily available.
12-16-2008, 12:43 AM
#15
Teching In
Join Date: Aug 2006
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Well I already have the LM7,its probably going in an S13 hatch...It was gonna be a tubbed out street/strip car but i miss corners too much will mainly be used as a street/drift/weekend/take out sat nights car...maybe some auto X. I just dont want it to be a donut machine im hoping it will be controlable with the extra weight...what kinda power are people pushin n/a with the 5.3's?
12-16-2008, 07:36 PM
#16
Well I already have the LM7,its probably going in an S13 hatch...It was gonna be a tubbed out street/strip car but i miss corners too much will mainly be used as a street/drift/weekend/take out sat nights car...maybe some auto X. I just dont want it to be a donut machine im hoping it will be controlable with the extra weight...what kinda power are people pushin n/a with the 5.3's?
Progress is nice on this project, lets see some video of it running and driving!!!
01-18-2009, 04:58 PM
#18
Sorry to resurect the thread, but what mounting kit did you use for your car? Do you have the car running yet? I've got an l33 motor that I'm gona throw into my s13 silvia as soon as I can get a t-56 and some other parts.
