1/4 mile guesstimate...
#1
Staging Lane
Thread Starter
1/4 mile guesstimate...
just wondering what you guys think the car will do at the strip...
99 corvette frc
6 speed
intake,exhaust,headers,short throw,thermostat,cam,tune.
99 corvette frc
6 speed
intake,exhaust,headers,short throw,thermostat,cam,tune.
#2
Registered User
Join Date: Oct 2011
Location: Palm Beach Gardens, FL
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
#3
11 Second Club
iTrader: (8)
Join Date: Mar 2007
Location: Windsor, Ontario Canada
Posts: 569
Likes: 0
Received 3 Likes
on
3 Posts
To give you an Idea...
My setup (changing currently)
2000 FRC
Stock Clutch
Stock Heads
LS6 intake
Stock Throttle body
Vararam
Custom Comp Turbo Grind 228/228 Cam.
160 stat
Hoozier 315/35-17 Drag Radials
12.47@114mph was my best but the clutch started to slip a bit, Ran consistant 12.70s for most of my runs.
I am going to 11.90-12.1@116mph depending on cam size and clutch
Jay
My setup (changing currently)
2000 FRC
Stock Clutch
Stock Heads
LS6 intake
Stock Throttle body
Vararam
Custom Comp Turbo Grind 228/228 Cam.
160 stat
Hoozier 315/35-17 Drag Radials
12.47@114mph was my best but the clutch started to slip a bit, Ran consistant 12.70s for most of my runs.
I am going to 11.90-12.1@116mph depending on cam size and clutch
Jay
Trending Topics
#8
Anywhere around 400 whp and a C5/C6 will run mid high 11's @116+ ish on a good tire if the driving is up to par!
Gears make a huge difference let that be one of the next mods on your list..
Gears make a huge difference let that be one of the next mods on your list..
#11
IMO corvettes are very hard to get any kind of good times with on normal street tires! My FRC ran 7.8's in the 1/8 on drag radials cause the clutch I had would not allow any clutch slip at all either smoked the tires or bogged! Went from drag radials to et streets and ran 7.3 first pass! I never even consider running my cars at the track unless I have good tires anymore, makes all the difference in the world!