Just installed a Line Lock
#1
TECH Addict
Thread Starter
iTrader: (21)
Join Date: Nov 2005
Location: Maine USA
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
Just installed a Line Lock
Wrapped up my Nitrous install and had the line lock plumbed and got to try it out today What a blast
Used a couple tutorials from the Corvette Forum one was Cajun Dudes and the other was this one http://corvetteforum.shelor.net/Line_Lock/default.asp
Fabbed my own bracket with a piece of aluminum from the hardware store, used a bandsaw to rough shape it then filed the sharped edges.
Here it is before the plumbing
Used the Cigerette Lighter hole for the button...no cutting required
Used a couple tutorials from the Corvette Forum one was Cajun Dudes and the other was this one http://corvetteforum.shelor.net/Line_Lock/default.asp
Fabbed my own bracket with a piece of aluminum from the hardware store, used a bandsaw to rough shape it then filed the sharped edges.
Here it is before the plumbing
Used the Cigerette Lighter hole for the button...no cutting required
Last edited by Beer99C5; 06-11-2006 at 02:48 PM.