1/8 mile with bolt ons. Good Enough??
#1
On The Tree
Thread Starter
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
1/8 mile with bolt ons. Good Enough??
Well went to Irwindale CA ran my 00 T/A with slp lid, 80 tb, bbk intake, hedman lt's no cats all the way back,2200 stall and tune. this is what i ran. Do you guys think this is good times?
1st run with M/T DR 17psi(stalled at 2000)
R/t .810
60' 1.942
330 5.571
1/8 8.488
mph 85.33
2nd run with M/T DR 17psi(stalled 2200)
R/t .727
60' 1.978
330 5.614
1/8 8.535
mph 84.96
What do you guys think. Im thinking of maybe thinking of throwing some 3.73's at it, because as im passing the finish line im barely shifting out of 3rd. NE feedback wil be appreciated. Thanx
1st run with M/T DR 17psi(stalled at 2000)
R/t .810
60' 1.942
330 5.571
1/8 8.488
mph 85.33
2nd run with M/T DR 17psi(stalled 2200)
R/t .727
60' 1.978
330 5.614
1/8 8.535
mph 84.96
What do you guys think. Im thinking of maybe thinking of throwing some 3.73's at it, because as im passing the finish line im barely shifting out of 3rd. NE feedback wil be appreciated. Thanx
#3
On The Tree
Thread Starter
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Well im not changing the gear, its auto so i really dont have a choice. i usually leave it on drive. i got stock 3.23 gears, Mickey thompson drag radials. 9.5inch wide
#5
My wife was out there last night with my SS.
The DA according to her weather station was around 2000'. That stall is very much like stock, so you are close to your potential with it. If you upgrade to a 3200 stall (like a Vig3200 or a Yank 3200) you will see better results.
The DA according to her weather station was around 2000'. That stall is very much like stock, so you are close to your potential with it. If you upgrade to a 3200 stall (like a Vig3200 or a Yank 3200) you will see better results.
#6
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
My Formula has a stock stall and a few bolt ons, and I've launched it anywhere from 800 rpm to 1400 rpm (most the stock stall would hold), and the 60 foots are better at 850-1000 rpm than higher.
Derek