ls1 mustang notch first pass
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
ls1 mustang notch first pass
Here are the mods
1989 notch 3100lbs with me in the car
un open 98 ls1 with 140,000 miles
long tube headers
th400 trans w 4000 stall
3.55 gears
stock ls1 intake
drag tires
it was 84% hum tonight and i ran the car with a full tank of gas. I also ran the car tonight with no o2 sensors at all, locked out so i'am not sure if that was part of the problem
heres what it ran
60- 1.73
330- 5.00
1/8- 7.72@90 mph
1000- 10.08
1/4- 12.08 @114 mph
it was a little hot so i think i might be able to pick up a few there but does this seem right. I think it should 60ft better but not sure if its real rich from the o2's locked out maybe
you think a ls6 intake would help that much ?
1989 notch 3100lbs with me in the car
un open 98 ls1 with 140,000 miles
long tube headers
th400 trans w 4000 stall
3.55 gears
stock ls1 intake
drag tires
it was 84% hum tonight and i ran the car with a full tank of gas. I also ran the car tonight with no o2 sensors at all, locked out so i'am not sure if that was part of the problem
heres what it ran
60- 1.73
330- 5.00
1/8- 7.72@90 mph
1000- 10.08
1/4- 12.08 @114 mph
it was a little hot so i think i might be able to pick up a few there but does this seem right. I think it should 60ft better but not sure if its real rich from the o2's locked out maybe
you think a ls6 intake would help that much ?
#5
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Capital raceway on friday, that was me. white with red flames or whatever they are on the hood . I didnt stay real long but i hope to maybe do the ls6 intake if it will help a little then try again
Trending Topics
#18
9 Second Club
iTrader: (10)
That 90 degree elbow is not helping at all, similar issue with the GTO's. If you can some how straighten that out it will help as well as a underdrive and ls6 intake. Also get the thing tuned with a wideband. Running no o2 sensors should throw a code and maybe put it into limp mode.
#19
I sure hope you act like an LS1 guy and not a stang *** bag! I have always been a ford guy but since meeting mustang owners at the track and on the street I really don't like anything stang.
#20
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys
the car was tuned with this same setup other then it had a zo6 cam then and now has the stock 98 cam. The o2 sensors were bad so he just locked em out. I also found my cheap old cone filter was rusted up and packed dirty so i bought a big new K&N filter
I didnt really think about a under drive pulley on here, do they help much.
I dont act crazy like some of those guys man i like all cars if they look good or go fast.
the car was tuned with this same setup other then it had a zo6 cam then and now has the stock 98 cam. The o2 sensors were bad so he just locked em out. I also found my cheap old cone filter was rusted up and packed dirty so i bought a big new K&N filter
I didnt really think about a under drive pulley on here, do they help much.
I dont act crazy like some of those guys man i like all cars if they look good or go fast.