SNLPerformance

iTrader: (15)

I got Fartpiped and didn't get into the 10's as planned, but am happy with the new personal best given the conditions. Iiifff only I hadn't had 3/8 of a tank instead of the normal 1/8, pulled the front sway, had better track prep(test n tune), better air (900' DA according to Dragtimes), had matched my previous best 60' of 1.54 it woulda/coulda/shoulda happened, oh well...I'm throwing in a "real" cam now, ported Fast 92/TB, 100mmMAF, and EWP. Will be looking for a 10.5 come fall. Changes from previous best in the same air is SNL tune, no cats, ported ls6 TB(previously ported Fast 90) and MN12 tranny. Interesting that new bests were only in the 1/4 ET and MPH. Tied my 1/8 ET, but was down 2mph given I was making the 3/4 shift in the 1st half now. Clutch never skipped a beat even hot lapping at the end.

Mods:

• 112k mile stock bottom end
• my custom 218* sleeper cam
• PRC stage 2.5 heads unmilled/stock gaskets
• ls6 intake
• stock 75mm MAF
• Vararam
• Kooks 1.75" headers
• TI Exhaust
• Monster Level 2 Clutch with 18lb flywheel
• 4.10 gears
• ET Streets on Magnesium wheels with 13psi
• GTO Spares

FWIW the shake down pass was against a 545rwhp cammed c6z. He's not a member, but believe his best was a 10.9@129 with a 1.6

procsls6

congrats need some vids. with the ti exhaust I guess it's a vette right.

SNLPerformance

iTrader: (15)

Sorry, I pasted this from the Corvette Forums. Correct it is a '99FRC and unfortunately didn't get any videos this time. There are some others on youtube under "vegaman72"

VIPRETR2

iTrader: (63)

That is some SICK mph for the mods. Color me impressed.

fly pantera

iTrader: (9)

way to go mph is where it should be,i was trapping 123-124 in a upper only pulley cobra with a raceweight of 3500 making 380 on a mustang dyno.