1/8th results guess my 1/4
#1
11 Second Club
Thread Starter
iTrader: (23)
Join Date: May 2003
Location: Eugene OR
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
1/8th results guess my 1/4
Ok other than pacesetters, ORY, Magnaflow, lid w K&N and a Delphi MAF my car is stock , currently at 91k, A4 3.23s, LS1
Here is my best run with bald DR's (new ones coming next year)
8.5928 @84.42 with a 2.0667 60'
We dont have a 1/4 here but the pervious owner said he ripped off 12.9s @ 108 with similar 60's ...................
Sound reasonable??
What do you think I could get if I could cut a 1.7-1.8 on some good DR's??
Thanks for the input!
Here is my best run with bald DR's (new ones coming next year)
8.5928 @84.42 with a 2.0667 60'
We dont have a 1/4 here but the pervious owner said he ripped off 12.9s @ 108 with similar 60's ...................
Sound reasonable??
What do you think I could get if I could cut a 1.7-1.8 on some good DR's??
Thanks for the input!
#2
TECH Junkie
iTrader: (4)
i'd say 13.3-13.1 @ 106/7 in the 1/4. you'll be hard-pressed to cut a 1.7/1.8 60' on the stock converter, drag radials or not. a friend of mine went 12.76 @ 108.99 this weekend in an 01 b4c a4, COMPLETELY STOCK except for pacesetter headers, true duals, lid, and a tune. this was on a 1.90x 60'. no weight reduction, just BFG DRs, a good hook, and 120k miles worth of abuse.
#3
11 Second Club
Thread Starter
iTrader: (23)
Join Date: May 2003
Location: Eugene OR
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
well also I should add I am leaving at idle, rolling out a few feet and then laying into the gas.............
Anything more than that just yields tire spin
A stall and 3.73s is on my list for next year also
Anything more than that just yields tire spin
A stall and 3.73s is on my list for next year also