26x11.50-16 ET Streets/426 RWHP/396RWTQ
05-05-2004, 07:13 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Dec 2003
Location: Novato, California
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
26x11.50-16 ET Streets/426 RWHP/396RWTQ I'm wondering if I should worry about the ET Streets I mentioned hitting the fender well while launching.
On BFG drag radials P255/16/50's I've cut a 1.64 60' time. I'm also running Hal QA1 rear drag shocks with Metco lower control Arms.
Since the new power output I haven't run ET Streets or for that matter got a decent run in yet, but this coming weekend I will be installing a Spec stage 3 clutch assembly & ET Streets.
Thanks for any help, Fred
On BFG drag radials P255/16/50's I've cut a 1.64 60' time. I'm also running Hal QA1 rear drag shocks with Metco lower control Arms.
Since the new power output I haven't run ET Streets or for that matter got a decent run in yet, but this coming weekend I will be installing a Spec stage 3 clutch assembly & ET Streets.
Thanks for any help, Fred
where ya racin, atco? I'll cross my fingers for 11's hehe
05-06-2004, 06:39 AM
#3
TECH Enthusiast
iTrader: (1)
Join Date: Nov 2001
Location: Atlanta
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Nope they don't rub the fender at all, I've got over a hundred passes on mine and never had any issues with them. I'd had them on my brother z28 as well they don't rub or scrub either.
05-06-2004, 11:30 AM
#4
they will not rub at all. i have 26/11.5/16 m&h rasemasters and they don't rub(they do hook better)www.intercotire.com i've had et-street and drags the m&h has out hooked them both.
