Carbon fiber sheet or fiberglass for wiring board
#1
Carbon fiber sheet or fiberglass for wiring board
Looking for a place to buy some carbon or G10 sheet. Need a piece that's 14x18, and would like a piece about 30 inches long, 7 inches wide.
Like to buy over the weekend if possible. can be blem's, don't have to be perfect, just have to be in good structural shape (no cracks, etc.)
Thickness, ..075-.090 carbon I think will be strong enough, .080 to .120 G10 will do. Not too picky on thickness as long as it's thick enough to hold electronics, msd grid box and ign, hvc2 coil, etc.
Shoot me a link if you have a retailer you have used that's reasonable, or if you have some laying around you don't need and/or are willing to part with.
Like to buy over the weekend if possible. can be blem's, don't have to be perfect, just have to be in good structural shape (no cracks, etc.)
Thickness, ..075-.090 carbon I think will be strong enough, .080 to .120 G10 will do. Not too picky on thickness as long as it's thick enough to hold electronics, msd grid box and ign, hvc2 coil, etc.
Shoot me a link if you have a retailer you have used that's reasonable, or if you have some laying around you don't need and/or are willing to part with.
#4
Got a guy that's wiring the car that's been doing them professionally for a long time, Rich Concato. I'm just building the board for him since I have the time. After seeing his work what's the nicest, is in the eye of the owner, and the guy doing it, and who's making money off it I think.
#7
Tim mcAmis sells some: http://timmcamis.com/shop/composites...at-sheets.html