Should I be happy with these times?
#1
TECH Veteran
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Warsaw, Va
Posts: 4,316
Likes: 0
Received 0 Likes
on
0 Posts
Re: Should I be happy with these times?
good times for a stock converter car!
drop a converter in there and go for my 7's and 11's stock internally <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
drop a converter in there and go for my 7's and 11's stock internally <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#2
TECH Addict
Join Date: Dec 2001
Location: Auburn, AL
Posts: 2,337
Likes: 0
Received 0 Likes
on
0 Posts
Should I be happy with these times?
Track prep was shitty as normal, weather was okay at best. The car was at full operating temp, had no time to cool down. At this track you have to drive through the water completely (can't go around). So, I could never catch traction completely. Anyway, my best time of the night (I broke out and lost in the semifinals <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> )
R/T: .509
60': 1.902
330': 5.386
1/8: 8.204 @ 87.33
I went back later to run my 8.1x after racing, but they cut off time trials at the car in front of me. Oh well, so should I be happy?
Mods: 255 BFG drag radials, Hooker headers, ORY, Hooker catback, lid, Shaner S2 TB. Probably had about 200 pounds out of the car too.
Forgot my car: 2002 A4 WS6, 3.23s; 5000 miles
<small>[ October 20, 2002, 12:43 PM: Message edited by: quickWS6 ]</small>
R/T: .509
60': 1.902
330': 5.386
1/8: 8.204 @ 87.33
I went back later to run my 8.1x after racing, but they cut off time trials at the car in front of me. Oh well, so should I be happy?
Mods: 255 BFG drag radials, Hooker headers, ORY, Hooker catback, lid, Shaner S2 TB. Probably had about 200 pounds out of the car too.
Forgot my car: 2002 A4 WS6, 3.23s; 5000 miles
<small>[ October 20, 2002, 12:43 PM: Message edited by: quickWS6 ]</small>