My C6 dyno #'s
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: The Woodlands, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
My C6 dyno #'s
Well here it is. It has a D1SC 9psi, DP Big mouth filter with 4" inlet, DP Blower cam, new springs, 60# injectors, Kenne Bell Boost a pump, RPS Carbon light twin disk. 653RWHP/546RWTQ
[IMG][/IMG]
[IMG][/IMG]
#6
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: The Woodlands, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to my dyno run and some exhaust for the cam sound
http://www.youtube.com/watch?v=bmHy3KEmpOA
http://www.youtube.com/watch?v=Ct_t2SLPwCc
Trending Topics
#11
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: The Woodlands, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Standard crank pulley and a 4.5 head pulley
Pump gas only, no meth yet. I will be doing meth this summer and we are hoping about 720 to the wheels. And it's definetely a blast to drive
Pump gas only, no meth yet. I will be doing meth this summer and we are hoping about 720 to the wheels. And it's definetely a blast to drive
#17
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: The Woodlands, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Most definetley, it ran me about 13K but that was with a cam and a carbon twin disk clutch. Even with just a SC you can get real close to 600 though. I would definetely go that route, imho