Low numbers on dynojet
#1
On The Tree
Thread Starter
Join Date: Aug 2010
Location: vicksburg ms
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Low numbers on dynojet
Hey guys I took my 00 ws6 to the dyno yesterday and made 2 pulls I only made 308hp and 348tq with mid length headers ory borla catback and a lid my car is a 2000 ws6 m6 runs great feels really strong just seems a little low to me
#2
Banned
iTrader: (24)
it all depends on what it dyno'd before the mods it also depends on the tune. Get long tubes, pulley, replace the ls1 intake with at least a ls6 intake unless you are planning on some internal mods later... if so get a fast intake, 3" Y pipe from the headers to the borla, and youll see decent bolt on results.
or you can get about the same or more from adding a 224ish cam pkg, and injectors to what you have. Either will require a tune.
Your torque number is nice and you said it feels good so thats the MAIN objective...
or you can get about the same or more from adding a 224ish cam pkg, and injectors to what you have. Either will require a tune.
Your torque number is nice and you said it feels good so thats the MAIN objective...