Tick Performance Polluter H/C LS1 Camaro
#1
Launching!
Thread Starter
iTrader: (21)
Join Date: Apr 2006
Location: Parma, Oh
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Tick Performance Polluter H/C LS1 Camaro
Mods in sig. From all the research and reading my car put down about what I expected. It is not what I wanted but with my supporting mods it's what it should be. 434/397 SAE. My LT1 style intake with autozone spectre cone filter is robbing an easy 20 RWHP. I'm in the process of adding a LS1 lid under my stock hood so that should put me around 450 which is what I wanted.
The car has quite a bit of surging and bucking which the tuner said it would do. He said they had trouble tuning with the FIC injectors I had. I don't lug around 1500 rpms anyway but it is a PITA when starting off from a stop. I hope ditching my 3.23 gears for 4.11's will help that though. I also went with solid motor mounts and it makes me not want to even drive the car.
I only banged the gears twice so far when I was on the highway and holy hell its a beast. Going from bolt on to this is unbelievable. The cam pulls super hard and doesn't quit. I'm going to ditch the SLP Loudmouth for something quite so I can actually go above 3k RPMs on the street.
Thanks to the folks at Tick for helping me out and answering all my questions. With a lid and 92/92 460+ easy out of this setup.
The car has quite a bit of surging and bucking which the tuner said it would do. He said they had trouble tuning with the FIC injectors I had. I don't lug around 1500 rpms anyway but it is a PITA when starting off from a stop. I hope ditching my 3.23 gears for 4.11's will help that though. I also went with solid motor mounts and it makes me not want to even drive the car.
I only banged the gears twice so far when I was on the highway and holy hell its a beast. Going from bolt on to this is unbelievable. The cam pulls super hard and doesn't quit. I'm going to ditch the SLP Loudmouth for something quite so I can actually go above 3k RPMs on the street.
Thanks to the folks at Tick for helping me out and answering all my questions. With a lid and 92/92 460+ easy out of this setup.
#3
Launching!
Thread Starter
iTrader: (21)
Join Date: Apr 2006
Location: Parma, Oh
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Yeah. I bought it off a guy on here that had a LS1 swapped car. I was never thinking of it eating horsepower until I dropped it off at the shop. The guy that tuned it popped the hood and first thing he said was "that's 20hp right there". After reading on here from lid swaps I knew he was right.
#7
Race your car!
iTrader: (50)
The 3.23 gear is making it lug hard at low rpm... tuning that is going to be a real bitch... putting the 4.10 or even a 4.30 gear in the car would make a BIG difference IMO. Putting a regular lid on the car will for sure help alot.. that thing you have on there is a perfect example of one more reason that the ltjunk's never made any power LOL.
Nice looking curve on the sheet, you get that intake and the gear issue taken care of and the car should be strong.
Nice looking curve on the sheet, you get that intake and the gear issue taken care of and the car should be strong.
Trending Topics
#10
11 Second Club
iTrader: (35)
Join Date: Dec 2004
Location: NW Chicago burbs
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
With a better induction I could see you making more power. 20whp might be optimistic but anything is possible.
Post up your results when you switch, I'm curious to see how bad that is hurting I use the run the same setup but did too many mods at once to see how much it actually helped.
Post up your results when you switch, I'm curious to see how bad that is hurting I use the run the same setup but did too many mods at once to see how much it actually helped.
#12
TECH Fanatic
iTrader: (16)
Join Date: Oct 2003
Location: Ruffin,N.C.
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
I have seen a 20 rwhp from changing to a lid over a similar set up like yours. As far as the gears go i would go with a 4.30 if you have a 12 bolt but if you are still on a 10 bolt stay with the 4.10's. congrats
#14
TECH Fanatic
iTrader: (16)
Join Date: Oct 2003
Location: Ruffin,N.C.
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
Well you would be wrong. I have seen a MS3 cam only car go from 385 rwhp to 415 rwhp with the kit that has two k&n filters on it to an slp air lid set up. Same day, never pulled off the dyno. Never would have believed it until we saw it.