Estimate the Power Ill Make on this setup!!!
#1
Teching In
Thread Starter
Join Date: Sep 2005
Location: Dearborn Heights, MI
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Estimate the Power Ill Make on this setup!!!
Im going to be building a LS1 motor using the 5.7 block and i am going to be leaving the entire lower half stock, including the connecting rods, and stock flat top pistons. I will list the other parts i am going to be using and i hope someone can give me an estimate of the power ill be making... thanks
- double roller timing chain
-Patriot 5.3 Stage III 1020 Superflow Bench 3.905 bore heads
- Vinci Cam-DUR @ .004" 284* / 290*
DUR @ .050" 222* / 228*
LIFT .551 / .551
OVERLAP 57*
LSA 115
-1.7 Roller Rockers
-Ported & Polished Oil pump
-Edelbrock performer Carb Intake/ Port matched and Polished
-Holley 950 or bigger Carb
-any other parts you need to make it more accurate please let me know. Thanks alot, Kevin
- double roller timing chain
-Patriot 5.3 Stage III 1020 Superflow Bench 3.905 bore heads
- Vinci Cam-DUR @ .004" 284* / 290*
DUR @ .050" 222* / 228*
LIFT .551 / .551
OVERLAP 57*
LSA 115
-1.7 Roller Rockers
-Ported & Polished Oil pump
-Edelbrock performer Carb Intake/ Port matched and Polished
-Holley 950 or bigger Carb
-any other parts you need to make it more accurate please let me know. Thanks alot, Kevin