installed tr224....crappy dyno results
#1
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: olathe,ks
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
installed tr224....crappy dyno results
Hey guys comment on this please. I recently installed a tr224/224 563. 112 in my 2002 ws6, at the same I had my LTs, 3500 stall, 3.73s and tunning done to it. It only made 344rwhp sonds like bullshit to me. I figured to have at least 380 to the ground. before I had this work done all i I had was a LM catback, k&n, lid, and a hypertech tuner and it made 315rwhp in my a4. Now thats only 28tish hp with a cam and LTs!!!!!!! Does this not sound right to anyone? Anyone else have this problem?
#6
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lilbuddy1587
3500 stall on a dyno = not so friendly with numbers. You guys should know something this basic. If the verter isn't locked up, it's going to show low numbers.
peace
Trending Topics
#10
TECH Enthusiast
iTrader: (18)
Join Date: Mar 2005
Location: Hattiesburg, Mississippi
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by getusumws6
Hey guys comment on this please. I recently installed a tr224/224 563. 112 in my 2002 ws6, at the same I had my LTs, 3500 stall, 3.73s and tunning done to it. It only made 344rwhp sonds like bullshit to me. I figured to have at least 380 to the ground. before I had this work done all i I had was a LM catback, k&n, lid, and a hypertech tuner and it made 315rwhp in my a4. Now thats only 28tish hp with a cam and LTs!!!!!!! Does this not sound right to anyone? Anyone else have this problem?
That sounds bout right to me, my car is REALLY close to yours. My cam is a 222/228 551/551 on a 115 and with my 3600 stall and 3.73's i made 375/358 locked, and bout 352/339 unlocked. Your setup sounds fine to me. As mentioned the stall and 3.73's are killing your numbers What times are you running, and MPH so i can compare my cars performance to yours
#14
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Jan 2006
Location: olathe,ks
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
I dont have any times yet, I'm still grinding on the brake calipers. I bought a set of 15x10s and MT 275/50/15 dr's so it would hook. My nitto 555 burn through 3 gears!
#16
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Mesa, Arizona
Posts: 1,691
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zspot98
Dynojet or Mustang?
#17
TECH Addict
iTrader: (18)
Join Date: Jun 2004
Location: WI
Posts: 2,247
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lilbuddy1587
Doesn't matter, did you not read the thread ? Unlocked 3500 stall + dyno = poor numbers. At the track will be a different story.
#19
TECH Junkie
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HAULNTA
I made 400/390 on my old TR224.
Not relevant, comparing M6 dyno numbers to unlocked stalled A4 dyno numbers is like comparing apples to monkeys.
#20
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
STALLED A4s AREN'T DYNO FRIENDLY.there was a mustang at an open dyno day last sat. that dynoed at 261rwhp. but he runs 12.0s with a 1.6+ 60'.this is with a 3800stall TQ and 4.10 gears,and a little 302 motor.
i think your numbers are probably on par with your mods.but if your not sure,have somebody else look at the tune.
i think your numbers are probably on par with your mods.but if your not sure,have somebody else look at the tune.