procharger LSx fitment in LT1 b-body
06-27-2012, 12:03 PM
#1
Teching In
Thread Starter
iTrader: (5)
Join Date: Apr 2008
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
procharger LSx fitment in LT1 b-body 5.3 LM4 swapped in, considering a procharger.
anyone know which setup will not have clearance issues on driver side (so f-body kit is probably out) and stock hood (truck kit is out)? does anyone have diagrams for GTO and y-body procharger kits?
there are no diagrams on their website, only diagrams available are for their LSx swap kit. i guess you gotta buy their blower 1st before you can look at how it fits...
anyone know which setup will not have clearance issues on driver side (so f-body kit is probably out) and stock hood (truck kit is out)? does anyone have diagrams for GTO and y-body procharger kits?
there are no diagrams on their website, only diagrams available are for their LSx swap kit. i guess you gotta buy their blower 1st before you can look at how it fits...
06-27-2012, 08:19 PM
#3
Teching In
Thread Starter
iTrader: (5)
Join Date: Apr 2008
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
can't tell much from your album pics. looking for a specification doc like this, but for GTO and C5 kit:
http://www.procharger.com/pdf/LSx_Serpentine_lr.pdf
http://www.procharger.com/pdf/LSx_Serpentine_lr.pdf
