703 CAMAROSS

I was wondering what some of you have used to make hoses for your stood up radiators. I should be able to use stock lower hose but I'm going to need to make one for the upper. If anyone has done this please let me know.

Ping King

iTrader: (20)

I'm having a dual pass built right now. I had built one myself but goofed on the last minute and punctured a tube.

Anyway...you can use a stock upper hose and clip it...use a 1.25 inch mender with beadrolls.

I built an aluminum tube.

703 CAMAROSS

Do you feel like the bead rolls are necessary? I feel like hose clamps would hold fine... I don't know anyone with a bead roller.

Ping King

iTrader: (20)

I would certainly bead roll a radiator tube. You can easily make a tool from a pair of pliers and an exhaust clamp. People have intercooler pipes slip off all the time from not having bead rolls, a radiator is pressurized to up to 15psi.