lsturbo

So I am doing a twin turbo setup on my car and trying to find the best way to feed oil to both turbos. My last car had a sing turbo and I just used the oil cooler port on the side of pan. I just don't now if it would be good to tee of the singal port to feed two. Any input our past experience would be great to hear thanks.

F110Mech

iTrader: (2)

https://ls1tech.com/forums/forced-in...cbr-block.html

I8URLS1

iTrader: (15)

I'm using this one, very nice piece

http://www.improvedracing.com/sensor...nes-p-341.html

lsturbo

Thanks for the info will look into it

code4

iTrader: (30)

I used the same port with a larger single then T'd near the water pump to two smaller lines. I use brake lines from NAPA. My twins haven't complained.

stevieturbo

As long as hoses are suitably sized, there is no issue.