jaywill

iTrader: (5)

Should I leave the 317 heads on or go with 799 heads

JoeNova

That's not anywhere close to enough info to determine.

Take your pick. High or lower compression.

Aaron at SDPC

Give us some more information about the build such as goals, intended use, horsepower goals, fuel type, etc.

jaywill

iTrader: (5)

stage 2 turbo cam ..tick or btr..pump gas 93, 7875 turbo, truck intake, 650rwhp, 350 trans 3500stall ,308 gears ect..

JoeNova

Pump gas, 317s.

Taxman20

iTrader: (11)

317 head is a good boost head. Low compression is easier to manage. I'm shooting for 1000rwhp on my 6.0 with an S482. Stock 317 heads. Just springs for the bigger cam and Manley valves installed because I had them.

jaywill

iTrader: (5)

thanks guys ..a stage 2 or 3 cam ???

Taxman20

iTrader: (11)

I am using an Isky cam spec'd by JFR. 224/224 112 with .578 lift

jaywill

iTrader: (5)

Ok thanks

JoeNova

Your do realize that "stage" means absolutely nothing unless you're talking about a specific manufacturer, right?

jaywill

iTrader: (5)

Yes I do.. Would this be a good turbo cam.???
http://www.competitionproducts.com/m.../#.V8edWEkpDqA

Taxman20

iTrader: (11)

I would contact one of the members here Jarret which is stock48, LMJS, tick, and a couple other guys. I went with Jarret because he has the same motor as mine in a heavy old Nova running 8:02 so I let him design mine. So for 75 more dollars you can get one that's built for you

FourG63 97GST

iTrader: (1)

depending on the turbo setup/exhaust setup. the cam mains job will be managing backpressure. can't randomly pick a "stage", well you shouldn't.

JoeNova

No, at least not for a single turbo setup.

jaywill

iTrader: (5)

Ok thanks

squarles67

I'm using this one from Tick for my turbo 6.0 http://www.tickperformance.com/tick-...1-ls6-engines/

Best bet is to contact them and see which one they would recommend for your combination.

jaywill

iTrader: (5)

thanks will do

jaywill

iTrader: (5)

i got a cam today it's a TSP grind..228/232 @.50* 588/595 lift..114

JoeNova

Thats a fairly large cam for what you're looking for.

Good luck.

rpturbo

iTrader: (47)

Sounds pretty good to me. I have heard my cam is a bit big for my setup/goals also though.