cam advice
03-14-2017, 07:33 PM
#1
cam advice I've got a foxbody I'm putting a twin turbo set up on and was going to see if the cam I got would be good or look for dif one.
It's a 6.0 lq4.It has 317 ported heads with a btr cam adv dur 278 int 287 exh DUR@. 050 226 int 234 exh lobe sep 116.0 vavle lift .605 576,edelbrock pro x intake. I took it apart put new bearings, rings gapped for boost,good head gaskets and studs. It has a power glide with Trans brake and 1.82 first gear and 3.42 rear.Would like around 700 rwhp to 800 if possible.It will see alot more street time then strip.Im putting a set of precision 6262 t4 with 81 ar.Also was going to see the best route for the fuel system,and ecu was going with either holley hp or dominator.Any advice would be appreciated this is my first turbo build.Thanks for any help.
It's a 6.0 lq4.It has 317 ported heads with a btr cam adv dur 278 int 287 exh DUR@. 050 226 int 234 exh lobe sep 116.0 vavle lift .605 576,edelbrock pro x intake. I took it apart put new bearings, rings gapped for boost,good head gaskets and studs. It has a power glide with Trans brake and 1.82 first gear and 3.42 rear.Would like around 700 rwhp to 800 if possible.It will see alot more street time then strip.Im putting a set of precision 6262 t4 with 81 ar.Also was going to see the best route for the fuel system,and ecu was going with either holley hp or dominator.Any advice would be appreciated this is my first turbo build.Thanks for any help.
