Blower Party at CDNPERF!!!!!!
#1
8 Second Club
Thread Starter
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Blower Party at CDNPERF!!!!!!
Well yesterday Dave@CDNPERF had a sort of blower party-look who showed up!
From left to right we have the F2, the F1A and Vortech YSi!
I think both the F1A and the YSi felt a little uncomfortable next to the F2 and it's 2700 cfm and seven second second status!
Actually I think the F1A even felt a bit pale in comparison-it's the smallest of all 3! With a modest 9" volute and 3.75" inlet it's surprising that it can outflow the YSi by 50 cfm-on paper at least(1650 versus 1600). But the little F1A has gone the distance by running 8's on a 347 while not even being pushed to it's redline!
Here's the F1A getting test fitted!
Where going to do this on every install from now on to make sure everything lines up!
Here's the F2 getting it's turn:
This is never going to work-Chris from ECS is going to hook us up with some brackets and the F2 and Dave and I tested fitted it for a custom cog setup!
I'll keep you posted on the results!
From left to right we have the F2, the F1A and Vortech YSi!
I think both the F1A and the YSi felt a little uncomfortable next to the F2 and it's 2700 cfm and seven second second status!
Actually I think the F1A even felt a bit pale in comparison-it's the smallest of all 3! With a modest 9" volute and 3.75" inlet it's surprising that it can outflow the YSi by 50 cfm-on paper at least(1650 versus 1600). But the little F1A has gone the distance by running 8's on a 347 while not even being pushed to it's redline!
Here's the F1A getting test fitted!
Where going to do this on every install from now on to make sure everything lines up!
Here's the F2 getting it's turn:
This is never going to work-Chris from ECS is going to hook us up with some brackets and the F2 and Dave and I tested fitted it for a custom cog setup!
I'll keep you posted on the results!
Trending Topics
#8
Leaded Fuel Ban in Canada
I just found links to this over on the Corvette forum. Definitely tell all of your fellow Canadian drag racers about this and get the word out for them to sign the petition.
Link to forum discussion with petition
"Regulations Amending the Gasoline Regulations" on Canada Gazette
Link to forum discussion with petition
"Regulations Amending the Gasoline Regulations" on Canada Gazette
#15
On The Tree
Join Date: Apr 2004
Location: Brampton, Ontario
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts