jasond26

iTrader: (22)

I have a 01 RCSB silverado w/plastic tank and plastic fuel pump bucket. I purchased a magnafuel 625 pump. What do you guys recomend for the feed line from the tank to the pump. I was just going to get the aeromotive 3/8 quick disconnect and run -8 down to the pump but I don't think that will be big enough to feed the pump. I would like to keep the stock tank.

Will -8 be big enough to feed the pump and if not what would be a better option. Thanks

Nasty N8

iTrader: (33)

You need to pull fuel from the bottom of the tank for that pump and we feed them with a large -12 line to the prefilter. I think a better option for your setup would be our dual Walbro pump assembly.

Nate

jasond26

iTrader: (22)

I already have the 625 pump and -8 lines and fittings and -6 return lines and fittings so changing to a walbro setup is not an option.