Splicing LS1 injector connectors into truck harness
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Splicing LS1 injector connectors into truck harness
Hi, I'm swapping out my truck injectors for some bigger LS1 type injectors, and I'll be splicing LS1 connectors into the truck harness.
The new connectors I have don't have color coded wires, so I'm wondering if it matters which wire is power and which is ground? If so, which side is which on the connector?
=-=
Kermit
The new connectors I have don't have color coded wires, so I'm wondering if it matters which wire is power and which is ground? If so, which side is which on the connector?
=-=
Kermit