anybody using nasty performance fuel system
#4
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Yes it hooks up to the stock location. You can look into this thread for the install
https://ls1tech.com/forums/fueling-injection/397817-nasty-performance-race-tank-installed.html
https://ls1tech.com/forums/fueling-injection/397817-nasty-performance-race-tank-installed.html
#6
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
No problem. I really wanted the rest of Nates system. But I had allready commited to Speed Inc. Since that was my intentions at first. But I went ahead and bought the tank from Nate because I could stop looking at it. And I wanted it to be sumped and didnt want to tap my plastic tank with bulkhead AN fittings. I went with a Aeromotive Elim pump upgrade and -8 feed and return. The only thing Im not sure about is what to do about my old evap system. Im thinking of just capping it off at the intake and just running a vent off the one tap where the filler attaches too.