noise with a Dana 60 "herd any?"
#1
Launching!
Thread Starter
iTrader: (11)
Join Date: May 2009
Location: Wisconsin
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
noise with a Dana 60 "herd any?"
Has anyone had a problem with gear noise with a Dana 60 for a f-body. I have read there is a fair amount of 12 bolts and 9" that have the noise brand new. Is it always the gears? or is there a problem with the design?
Last edited by jman54002; 10-03-2009 at 07:05 PM.
#7
11 Second Club
iTrader: (35)
Join Date: Dec 2004
Location: NW Chicago burbs
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
I have one with very little gear whine (4.10s with trutrac) my 10 bolt with 410's had more noise.
NOW a buddy of mine has one 3.73's trutrac 635rwhp/545tq and it whines like no other around the 40-50mph range and 60-70 range..... I've never heard ANY Rear end whine so bad! So his would be the only exception to the quite rule.
NOW a buddy of mine has one 3.73's trutrac 635rwhp/545tq and it whines like no other around the 40-50mph range and 60-70 range..... I've never heard ANY Rear end whine so bad! So his would be the only exception to the quite rule.
Trending Topics
#8
TECH Addict
iTrader: (15)
Join Date: Jun 2002
Location: IL
Posts: 2,642
Likes: 0
Received 0 Likes
on
0 Posts
Mine has had a whine since it was brand new. Had Billingsley and a Strange Tech look at it and checked everything out, and couldn't find anything wrong. Tried two different rear covers and fluid additive from Strange, neither really helped. Noise is around 40-50mph, nowhere else. 4:10's w/Tru-Trac, 35 spline axles. Have been thinking about going with a lightweight spool.
#9
11 Second Club
iTrader: (35)
Join Date: Dec 2004
Location: NW Chicago burbs
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Thats where my noise occurs as well. I would love to go with a spool if I could keep my ABS.
Does your whine on decel?
Does your whine on decel?
Last edited by SmokedOutZ28; 10-11-2009 at 12:22 PM.