Floorman279

iTrader: (11)

Yanked the old ten bolt out by myself today......took 4 hrs which i guess for an inexperienced 19 year old isnt too bad. ......the s60 will be here soon, and getting the lighter one out semi sucked.....so im not feeling the best about installing the heavy......any tips besides takin my time.......again?

HoLLo

iTrader: (17)

Honestly man it's pretty straight forward, as long as the rear end is already fully assembled. Don't worry about the weight, it'll be worth it when it doesn't break!

BOLO

iTrader: (40)

Taking out the old 10 bolt was nothing for me. Installing the S60 was also straight forward. Everything bolts right on to stock location. But you do need an extra person and a good quality trans jack of some sort. Good luck.

Floorman279

iTrader: (11)

lol the extra weight is only worrying me with getting the thing up and in lol

Big Al

iTrader: (1)

I used a cheap transmission jack. A decent floor jack would work but might take a little longer. As everyone said it's a drop in. Except for the drive shaft. That will need to be modified.

Al 95 Z28, TH400, S60