intermediate shaft to short with tube k-member
#1
intermediate shaft to short with tube k-member
Hey guys, I installed a tubular k-member in my 2000 Camaro and im having a problem with the intermediate steering shaft length. I loosened the upper bolt in the shaft and forced it down but just don't like it. the factory k-frame I had no problem, I did buy this k-frame used but looked in great shape. any thoughts on this, thanks
#4
it goes on good but the bolt that goes threw ( the notch on rack ) doesn't line up and I have to use a pry bar to force it do enough for the bolt to go threw and I loosened the upper bolt and have it as far as its going to go. As far as the k-member, I asked the guy who k it is and he thinks its a bmr but wasn't positive. Its a older one ( 8-9 yrs ) but low miles on it. I have looked at some of the web sites - bmr-umi and they look alittle different. I mean that it will attach and tighten, I just don't like the fact that I have to pry on it