General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

Brights Quit Working?

Thread Tools
 
Search this Thread
 
Old 04-30-2007, 10:47 PM
  #1  
Launching!
Thread Starter
iTrader: (3)
 
soulless's Avatar
 
Join Date: Mar 2006
Location: searching for the perfect driving line
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts

Default Brights Quit Working?

All of a sudden my brights won't come on. The switch doesn't even seem to click. Do I have to get into the steering column to replace it? I never have taken apart steering column, so any advice would be great.
Old 04-30-2007, 11:01 PM
  #2  
On The Tree
 
LS1_TA_2002's Avatar
 
Join Date: Jan 2006
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
Default

Yep new turn signal switch if it isn't clicking.
Old 05-01-2007, 04:02 PM
  #3  
Launching!
Thread Starter
iTrader: (3)
 
soulless's Avatar
 
Join Date: Mar 2006
Location: searching for the perfect driving line
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts

Default

Anybody replaced the switch before? Seems like a pain.
Old 05-02-2007, 05:00 AM
  #4  
On The Tree
 
LS1_TA_2002's Avatar
 
Join Date: Jan 2006
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by soulless
Anybody replaced the switch before? Seems like a pain.
If you're comfortable removing the steering wheel and unplugging air bags then no, not too big of a pain. Just take a peek at a haynes manual or buy one for that matter, because you'll need to rent a lock plate removal tool and buy some snap ring pliers if you don't own any. If on the other hand you cringe at the thought of replacing your air filter then I would leave it up to a pro.

P.S. If you go the DIY route make sure you disconnect the battery's negative terminal and wait like 5 min. before you start working around the airbag in order to prevent accidental deployment.




All times are GMT -5. The time now is 09:03 AM.