turn signal doesn't work, already replaced bulbs
#1
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Oct 2006
Location: Everywhere
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
turn signal doesn't work, already replaced bulbs
Answer this one guys...
Both of my blinkers quit working. I replaced one of the back passenger side brake bulbs and the right blinker is working again. However, I replaced the front driver side parking orange bulb, the drivers orange front side marker bulb, and the brake bulbs look to be fine. But my left blinker is still staying solid and not flashing????
Update: the big orange corner light (driver side) I replaced today. when I don't have the light switch turned to off, the passenger side corner light is lit up. but even after replacing the bulb on the driver side it still doesn't light up like the other one. But when the lights are turned on, it works! I'm confused?
Both of my blinkers quit working. I replaced one of the back passenger side brake bulbs and the right blinker is working again. However, I replaced the front driver side parking orange bulb, the drivers orange front side marker bulb, and the brake bulbs look to be fine. But my left blinker is still staying solid and not flashing????
Update: the big orange corner light (driver side) I replaced today. when I don't have the light switch turned to off, the passenger side corner light is lit up. but even after replacing the bulb on the driver side it still doesn't light up like the other one. But when the lights are turned on, it works! I'm confused?
#4
Copy & Paste Moderator
Check out this sticky:
https://ls1tech.com/forums/showpost....18&postcount=7
That is one of the topics in the "Lighting FAQ", which is in the "Hall of Fame" sticky in the "Appearance & Detailing" section. There is also a link to the "Lighting FAQ" in my sig.
https://ls1tech.com/forums/showpost....18&postcount=7
That is one of the topics in the "Lighting FAQ", which is in the "Hall of Fame" sticky in the "Appearance & Detailing" section. There is also a link to the "Lighting FAQ" in my sig.
#5
Teching In
iTrader: (1)
Join Date: Nov 2006
Location: North America
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I would recommend using at least a quality OEM replacement. I went and got the AC delco replacements.. too bad it was like 50$ each.
#7
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Oct 2006
Location: Everywhere
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
according to this sticky: https://ls1tech.com/forums/showpo...18&postcount=7
it's not the flasher, since the right blinker works.
I noticed the front left turn signal doesn't flash when it's supposed to, and the tail-light brightens up but stays solid.
it's not the flasher, since the right blinker works.
I noticed the front left turn signal doesn't flash when it's supposed to, and the tail-light brightens up but stays solid.
Trending Topics
#13
Copy & Paste Moderator
The front turn-signals/DRLs use dual filament bulbs.
With the headlights off, the DRLs use the bright filament.
With the headlights on, the DRLs use the dim filament.
In both situations, the signals use the bright filament.