Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Rough on Cold Start

Thread Tools
 
Search this Thread
 
Old 02-04-2009, 01:11 PM
  #1  
Teching In
Thread Starter
 
r0nd3L's Avatar
 
Join Date: Apr 2008
Location: Oak Brook, IL
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default Rough on Cold Start

I've been having this weird issue for a little while. Basically, when I cold start the car it runs rather rough. Sometimes revs drop to 200 and it almost dies out, then jump back to 1,000. After couple of those cycles it settles at normal idle.

Also, after cold start if I rev it to 2,000 the motor feels very rough almost like it's misfiring.

I changed the spark plugs and had my tune checked and it seems ok.

I do have epoxy on the TB, so I think that could cause the idle problem but not sure of the roughness when I rev it.

The car is all stock besides ported TB, Corsa cat-back, and a tune.
Old 06-07-2010, 03:19 PM
  #2  
Teching In
 
jh2586's Avatar
 
Join Date: Sep 2009
Location: Hayward, CA
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

i'm having the same issue.. did you ever figure it out? my car is BONE stock except for a catback exhaust




All times are GMT -5. The time now is 03:29 PM.