Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Help with plug wires..

Thread Tools
 
Search this Thread
 
Old 10-29-2003, 09:36 AM
  #1  
Turbo Addict
Thread Starter
iTrader: (3)
 
RICE ETR's Avatar
 
Join Date: Apr 2002
Location: Virginia
Posts: 1,128
Likes: 0
Received 1 Like on 1 Post

Default Help with plug wires..

I need to slightly move my coil packs and run all the driver side wires up front towards the power steering pump, down the front of the engine approx through the head gasket area then down around the underside of the headers and to each of the four plugs with a 90 degree boot for added clearance.

I searched and found guys using the custom wire sets for Lt1's.... summit has the MSD 8.5 mm set with the 90 degree boots ~ $70.... question is will that much plug wire hurt things on these cars since they are not the same length like they are stock? How many feet of wire do they give you?

Sorry for the silly questions... just wanna make sure though.

Thanks,

-Jarrod
Old 10-29-2003, 06:33 PM
  #2  
Turbo Addict
Thread Starter
iTrader: (3)
 
RICE ETR's Avatar
 
Join Date: Apr 2002
Location: Virginia
Posts: 1,128
Likes: 0
Received 1 Like on 1 Post

Default

anyone?

Thanks




All times are GMT -5. The time now is 09:33 PM.