edzsilverss

iTrader: (4)

I am buying a harlan shift light tomorrow and don't really know what would be the best rpm to set it at. My limiter is set to 6800 I'm pretty sure. I was thinking around 6400. Mods in sig and I do have 4.10 gears so it revs fast as **** and I'm about to get it retuned for the 150 shot next week as well. What do you boys think?

SweetS10V8

iTrader: (4)

Where does the dyno say your making peak power?? Take that and add 200RPM or so....

Michael02hawk

iTrader: (26)

I actually set my shift light 200rpms LESS than my peak HP.

Since it will take me 1/2 second to react to the light, by the time I do, I should be right at peak.

the_merv

iTrader: (88)

Mine peaks at 6300..I shift at 6500..light is set at 6400 for my reaction delay.

Top Fuel

iTrader: (8)

mine is set at 6800

fastfox

my rev is set at 7000 my light comes on at 6800

allngn_c5

iTrader: (3)

6400 light, 6800 limiter, and its set as is due to my slow shifting. By the time the next gear is grabbed the motor is probably turning 6600ish

edzsilverss

iTrader: (4)

Well my only dyno sheet with this engine don't show the rpm's at the bottom. It has hp on the left and mph on the bottom. I guess I need to ask my tuner where it peaks and see what he says.