Cam selection
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Oct 2005
Location: FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Cam selection
OK I got a ls1 in my 85 mustang.
I have some 5.3 heads that flow 330 cfm at 600 lift.
the car weighs in at 2900 lbs
has a th400 with a 3400 stall that is loose, and 3.27 gear.
I am looking for some cam suggestions to run N/A
I had a 588 lift 230 dur 114 lsa cam (the engine had an oil issue and consumed this cam and #6 bearing)
looking to push the lift up to around 600 to take full advantage of the heads.
Any suggestions this car is driven on the street afew times a week.
I have some 5.3 heads that flow 330 cfm at 600 lift.
the car weighs in at 2900 lbs
has a th400 with a 3400 stall that is loose, and 3.27 gear.
I am looking for some cam suggestions to run N/A
I had a 588 lift 230 dur 114 lsa cam (the engine had an oil issue and consumed this cam and #6 bearing)
looking to push the lift up to around 600 to take full advantage of the heads.
Any suggestions this car is driven on the street afew times a week.