Short belt with a 10% underdrive pulley
01-08-2011, 02:46 AM
#1
TECH Apprentice
Thread Starter
iTrader: (13)
Join Date: Jul 2003
Location: Tempe, AZ
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Short belt with a 10% underdrive pulley I could not find the exact length I needed to bypass the PS pump by searching, the best guess I could find is 51-52".
So after trying a few diffrent belts I found the 52-7/8 is a perfect fit. I just wanted to post that up for everyone, maybe it will save you some time. BTW it is a Gates brand belt from Checker.
So after trying a few diffrent belts I found the 52-7/8 is a perfect fit. I just wanted to post that up for everyone, maybe it will save you some time. BTW it is a Gates brand belt from Checker.
01-08-2011, 04:41 AM
#4
TECH Apprentice
Thread Starter
iTrader: (13)
Join Date: Jul 2003
Location: Tempe, AZ
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
I was running the ASP 25% underdrive, but with the A/C running at an idle the volt meter would dip down to the red and my A/C would stop blowing cold air.
I drove for 6 years like that and it never hurt anything. But I figured ATI looks like a superior product, so when I did the H/C install I changed to ATI.
I drove for 6 years like that and it never hurt anything. But I figured ATI looks like a superior product, so when I did the H/C install I changed to ATI.
