FCar2000TA

iTrader: (7)

Can I use silicone gasket maker along with the O-ring between my throttle body and intake? The O-ring won't stay put when I put the throttle body on, so I think I have a leak.

I am thinking about covering the O-ring with gasket maker to keep it in place.

Jontall

I'd use some silicone grease to hold it in place (Sil Glyde) to get it to stay put.

FCar2000TA

iTrader: (7)

It looks like the problem is the O-ring on the 102mm-92mm spacer. It is barely thicker than the channel for it. I used red RTV to hopefully help. I might have to get a better O-ring from F.A.S.T. If the RTV doesn't work.