'00 Catch Can Mounting
05-10-2005, 09:26 AM
#1
TECH Enthusiast
Thread Starter
Join Date: May 2005
Location: Pearland/Houston, Tx
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
'00 Catch Can Mounting I have a '00 Trans Am with the EGR still installed. I am thinking of getting a catch can for the car seeing as how I keep hearing about the oil consumption issues. I was wondering, I read all over the place about how people have installed these that dont have the EGR, but what I am wanting to know is there anyone out there that has installed a Catch Can from AMW and if so do you have any pictures of how they are installed?
05-10-2005, 11:44 AM
#2
TECH Senior Member
iTrader: (10)
Join Date: Mar 2003
Location: North Texas
Posts: 8,009
Likes: 0
Received 0 Likes
on
0 Posts
remove the EGR, easy as that.
you can hook them up anywhere in the engine, just have to make sure the hose reaches. do a search and you'll find some pics of how other people have done it.
you can hook them up anywhere in the engine, just have to make sure the hose reaches. do a search and you'll find some pics of how other people have done it.
05-10-2005, 02:21 PM
#3
TECH Enthusiast
iTrader: (8)
Join Date: Feb 2004
Location: In my garage
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
I've got a '00 camaro and kept the EGR intact. Can is mounted to passenger side fog light bracket with a hose clamp and hoses are routed through a hole in front of the battery. To drain I loosen the access flap under the fender 2 10mm bolts and open petcock valve.
This was easy to perform. I really need to take pictures.
This was easy to perform. I really need to take pictures.