Help needed to identify manifold/headers
#1
Teching In
Thread Starter
Join Date: Jul 2005
Location: Verwood, UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Help needed to identify manifold/headers
I have installed an LS1 into a 1998 Range Rover. It is fitted with some cast iron headers that helpfully fitted without mods. I need some gaskets for the downpipes and will also like to replace the headers with some shorty headers. In order to do this I need to know what they are. Attached is a picture of the manifold. Cheers Nick
#4
Teching In
Thread Starter
Join Date: Jul 2005
Location: Verwood, UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys
If these are stock anybody able to give me the part number for the downpipe gaskets? And at the risk of opening up an inappropriate thread what recommendations for headers? Nick
#6
On The Tree
iTrader: (3)
Join Date: Jun 2005
Location: San antonio
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ground@btinternet.co
If these are stock anybody able to give me the part number for the downpipe gaskets? And at the risk of opening up an inappropriate thread what recommendations for headers? Nick
RH 88891747
LH 12555806
Hope this helps