98NATA

I want to put a cutout on my car and was going with the QTP one from summit for $150 in 3". Does this include everything I'll need because it seems cheaper than everywhere else I've looked and 3" is the correct size for under the rear seats where most people put them right? I know i dont want it pointed up but what way is recommend? If anyone has detailed pictures please post them. thanks

formula001

iTrader: (1)

Yes it will include everything you need. 3inch is what you want, it will fit just fine right under the rear passenger seat and you can even run the wiring through the rubber gromet underneath the seat.

WhiteKnight98TA

iTrader: (1)

yeah what he said.

98NATA

Thanks guys any pics so i can make sure they dont screw it up when they weld it in?

formula001

iTrader: (1)

Im sure any experianced welder at an exhaust shop will not screw it up. You can have it welded in kind of sideways so to speak so that the air flow will turn down and exit towards the road, but theres only so much room to play with so you dont mess with ground clearance. You will get a build up of black **** under your car but nothing to worry about.

Quick Time

iTrader: (1)

You just purchased our electric valve. They do not carry ourt stainless steel cutouts. You will need #10300. That is the y pipe that you weld to your exhaust. You just got the electric valve.